Supermicro X12SDV-4C-SPT4F User Manual page 118

Super X12SDV-4C/8C/10C-SPT4F User's Manual
Note 2: Before recovering the main BIOS image, confirm that the "Super.ROM" bi-
nary image file you download is the same version or a close version meant for your
motherboard.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into your USB
port and reset the system until the following screen appears:
3. After locating the new BIOS binary image, the system will enter the BIOS Recovery
menu as shown below:
Note: At this point, you may decide if you want to start the BIOS recovery. If you decide
to proceed with BIOS recovery, follow the procedures below.
118