Supermicro X12SDV-4C-SPT4F User Manual page 106

Super X12SDV-4C/8C/10C-SPT4F User's Manual
Default Options
Restore Optimized Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Save & Exit menu and press
<Enter>. This enables you to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Save & Exit menu and press <Enter>.
Use this feature to retrieve user-defined settings that were saved previously.
Boot Override
UEFI: Built-in EFI Shell
(B3/D0/F0) UEFI PXE IPv4: Intel(R) Ethernet Controller X550
(MAC:xxxxxxxxxxxx)
(B3/D0/F1) UEFI PXE IPv4: Intel(R) Ethernet Controller X550
(MAC:xxxxxxxxxxxx)
(B244/D0/F0) UEFI PXE IPv4: Intel(R) Ethernet Connection E823-L for SFP
(MAC:xxxxxxxxxxxx)
(B2/D0/F2) UEFI PXE IPv4: Intel(R) Ethernet Connection E823-L for SFP
(MAC:xxxxxxxxxxxx)
Launch EFI Shell from filesystem device
This feature attempts to launch EFI Shell application from one of the available filesystem
devices.
106