240
Cleaning the display
CAUTION: Cleaning the display
Take care when cleaning the display, to avoid damaging it.
Do NOT wipe the display screen with a dry cloth, as this could scratch
(1)
the screen coating.
Do NOT use acid, ammonia based or abrasive products.
(2)
Regularly clean your Display as follows:
1. Switch off the power to the Display.
2. Wipe the Display with a clean soft cloth. To remove oily finger marks use a spray
cleaning agent of the type used for cleaning eyeglasses.
A suitable micro-fibre cloth is supplied with your display and spray can be purchased
from your local optician.
16.3 Resetting the Display
You can reset the E-Series Display in several ways:
• Settings reset.
• Settings and data reset.
Settings reset
All system set-up menus, including page sets and the data bar are reset to the factory
default, when you apply a settings reset. Your waypoints, routes and tracks are NOT
removed.
Applying a settings reset
To apply a settings reset:
MENU
The system resets and returns you to the power on procedure.
Setup
Position mode...
Radar Setup...
ID Setup...
Simulator...
GPS Status...
Bearing Mode...
Compass Setup...
MOB Data Type...
Manual Variation...
System Setup...
Language...
Extendeded Charater Set...
Highlight System
Setup menu
Ground Trip Reset
Settings Reset
Select System
Settings And Data Reset
Setup menu
E-Series Networked Display Reference Manual
System Setup Menu
Lat/Long
ON
True
Position
o
Auto (01
E)
o
00
English (US)
OFF
Highlight Settings Reset
Select settings
reset
Yes