Raymarine E120W Reference Manual page 116

100
Important: Any offset entered will be applied to all charts on the chart card. You
should therefore ensure that this feature is switched off once you have transitioned off
of the errant chart. Any charting errors that you discover should be reported to
Navionics (see
To switch on chart offset:
If your vessel position is not available, the current chart centre is used as the ref-
Note:
erence point.
Changing the offset value
To change the offset value:
1. Select the Chart Offset function (see previous section)
2. Set the north/south offset value:
3. Set the east/west offset value:
Resetting the offset value
To reset the chart offset to zero:
1. Select the Chart Offset function (see previous section).
2. Reset to zero:
page 247
).
Alarm Setup Menu
Object Information
Vector Length
Datum
Chart Offset...
Select Chart Offset
SET OFFSET...
ADJUST E-W
0ft
Or
Press
E-Series Networked Display Reference Manual
Points ON
Infinite
OFFSET
ON
WGS 1984
Toggle to ON
ADJUST N-S
0ft
or:
ADJUST E-W
121ft
Adjust East/ West
or:
level as required.
ADJUST N-S
-80ft
Adjust North/
South level as
required.
OK