Raymarine E120W Reference Manual page 43

Chapter 2: General Operation
4. Add a hint, to help you to remember your password (optional):
e.g.
The password is now set and protection enabled although access to the waypoint and
route functions remains available until you restart your system.
If required, this password can be changed by selecting the Change Password
Note:
option on the Waypoint Password Setup Menu.
Enabling/disabling password protection
Once you have set up a password on your system (see previous section) you will need
to key in this password whenever you want to change the status of the password
protection feature.
To enable/disable password protection:
1. Select Waypoint Password Setup:
MENU
2. Enter your password ensuring that the appropriate upper or lower case characters
are used and then enable/disable the password protection, as required.
Enter Password
Password:
Enter password
Important: If you enter an invalid password more than twice within one power cycle
the system shall display the hint. There is no limit to the number of attempts to enter a
valid password but if you forget your password, you will need to perform a Settings
Edit Password
Carrot
Password:
Carrot
Confirm Password:
Hint: Rabbit
Choose a word that will help you
to remember your password
Add a hint word
and/or:
(0-16 characters)
Setup
Radar Setup...
GPS Status...
Compass Setup...
System Setup...
Highlight required
System Setup Menu
Select System Setup
Menu
OK
Carrot
Your password has been accepted.
If you continue your waypoints
and routes will be protected.
If you forget your password you
OK
will lose your waypoints and
routes
Raymarine recommends that you
archive your waypoints and routes
Do you want to continue?
YES
Read and accept the warning
System Setup Menu
System Integration
Waypoint Password Setup
Highlight Waypoint
Password Setup
Select Waypoint
Password Setup.
Waypoint Password Setup
Enable Password OFF
Change Password...
Select Enable Password
Select OFF
27
OK