Multiple Views; Vessel Offset - Raymarine E120W Reference Manual

Chapter 5: 3D Chart

Multiple views

You can display multiple 3D chart views by creating a page that shows 3D cartography
in up to 4 windows. As each window is a separate application, they can be set up to
operate in active motion mode or planning mode or a combination of the two.
These can be views of:
• The same area of the chart from different angles.
• Views of up to 4 different areas of the chart.
For full details of page set up and "active" windows refer to page 17.
Note:
Multiple 3D views
Example:
Four 3D application windows showing the same area of the chart but from 4 different angles.

Vessel offset

You can specify whether the boat is fixed in the centre of the window (0 offset) or offset
by 1/3 or 2/3 of the screen. If you change the offset to 1/3 or 2/3, the view ahead of your
boat will be increased.
PRESENTATION...
3D VIEW VESSEL OFFSET
OPTIONS... 0
109
1/3 2/3