Changing The Default Symbol Or Group - Raymarine E120W Reference Manual

Chapter 3: Working with Waypoints
Erasing all waypoints
If you need to erase all your waypoints, you can use the ARCHIVE & TRANSFER soft
keys:
1. Select the ERASE FROM SYSTEM option and the appropriate list:
DATA
2. Erase all waypoints:

Changing the default symbol or group

When you add a waypoint to your system it is assigned to the default group and given
the default symbol:
My Waypoints
If these are not suitable, you can select an alternative symbol and group to be the
default. For an alternative group to be selected for the default, it must first be created -
page 43
see
1. Select either the default symbol or group:
WPTS
MOB
2. Change the symbol or group default:
Symbol
ARCHIVE AND
TRANSFER
System Waypoint List
Waypoint Group 1
Waypoint Group 2
Waypoint Group 3
System waypoint list
displayed
Default Symbol
Default Group
.
REVIEW AND EDIT
WAYPOINTS...
EDIT DEFAULT
ERASE FROM
SYSTEM...
Select the WPT list
ERASE ALL
WAYPOINTS
SET DEFAULT SYM
& GROUP...
Toggle to required option.
Default displayed.
Select required
Or
default symbol
41
SELECT LIST
WPT
YES
SET UP DEFAULT
SYMB
D8290-1
OK
To save