Raymarine E120W Reference Manual page 176

160
Tracking a target with a VRM/EBL
You will be able to tell which way the target is traveling by watching how it moves in
relation to the EBL. If it continues traveling directly along the EBL, it shows that it is on
a possible collision course with your boat - take the appropriate action.
Creating a VRM and/or EBL
To use VRMs and EBLs to tell you the range and bearing of a target:
1. Select the VRM/EBL 1option:
The first VRM/EBL will be placed at a location of 1/3 of the current range and
Note:
030° relative to your boat's head. If this setting is adjusted, the display will retain the
adjustments and use them when the VRM/EBL is next turned on.
2. Adjust the VRM to the required size:
3. Adjust the EBL to the required angle:
ADJUST EBL
4. Save the adjustment and remove control from the VRM/EBL:
5. To place a second VRM/EBL if required:
VRM/EBL...
Adjust VRM to
required size
0
xxx
Adjust EBL to
required angle
SET UP VRM/EBL
2
E-Series Networked Display Reference Manual
VRM/EBL 1
ON
Toggle to ON
Adjust VRM highlighted
ADJUST VRM
0.838nm
Distance from your
boat to VRM displayed
on soft key.
ADJUST EBL
0
41 P
Angle to starboard/
port displayed on
soft key.
VRM/EBL 2
ON OFF
Toggle to ON
Adjust VRM highlighted
OK