Managing Data; Writing/Retrieving Data To A Compactflash Card - Raymarine E120W Reference Manual

Chapter 2: General Operation
appears on all displays in the network. All displays will therefore need to be
restarted individually.
You must only remove the card while the CF Card Removal message is displayed.
Once the message is closed, the card should no longer be removed.
2. Open the chart card door.
3. Grip the card and pull to remove it from its slot.
4. To prevent the ingress of water and consequent damage, close the chart card door
and press firmly until a click is heard.
5. Press OK.
...with the unit powered down
1. Open the chart card door.
2. Grip the card and pull to remove it from its slot.
3. To prevent the ingress of water and consequent damage, close the chart card door
and press firmly until a click is heard.

2.8 Managing data

This section explains how you can manage the data contained in your E-Series and
includes the following:
• Writing/retrieving to a CF card.
• Erasing information from a card.
• Erasing information from your system.
• Transferring information to/from a PC.
• Password protection.

Writing/retrieving data to a CompactFlash card

Your display can save up to 1,200 waypoints, 150 routes and 10 tracks in data base
lists. Once this number is reached you will need to archive data to a CompactFlash card
for safe-keeping or retrieval at a later date. Alternatively, you can transfer data to
another instrument or PC using SeaTalk
also receive waypoints, routes and tracks from a PC, other SeaTalk
NMEA instruments (see
Note: In a networked E-Series system, you archive to and retrieve data from the Com-
pactFlash card in the display on which you are working.
hs
or NMEA. When navigation is active, you can
page 25
).
21
hs
, SeaTalk and