Customizing The Video Application - Raymarine E120W Reference Manual

180

Customizing the video application

When you first use the video application, it defaults the input source type to
Composite,
to OFF. You will need to change these defaults in the following circumstances:
• If you have installed cabling for use with equipment using S-video.
• If you wish to give each video input a more meaningful name e.g. engine room,
view stern etc., DVD player etc.
• If you wish to set up the option to cycle through the available images.
All these options are accessed via the Video Setup Menu:
Press and hold
Video 1, 2, 3 or 4
You can now:
• Edit the input source type i.e. Composite to S-Video.
• Edit the video source name.
• Set up video cycling.
Selecting the input source type
Your Display is supplied with cabling to connect to a composite input source. If your
camera, DVD etc. uses S-Video input, you will need to purchase and fit the appropriate
cabling in the configuration detailed in the Installation Guide.
Each item of S-video equipment uses 2 of the 4 video inputs i.e. Video 1/2 or Video 3 /
4. Once installed the Video Setup should be adjusted to reflect this alternative input:
1. Open the Video Setup Menu, as previously described.
2. Set Video 1 to S-Video:
Cycle 1
Cycle 2
Cycle 3
Cycle 4
Cycle Period
Video 1...
Video 2...
Video 3...
Video 4...
3. Save and return to Video Setup Menu:
labels the video images
Cycle 1
VIDEO x
Video Setup Menu
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
10secs
COMPOSITE VIDEO 1
COMPOSITE VIDEO 2
COMPOSITE VIDEO 3
COMPOSITE VIDEO 4
Highlight Video 1
Select Video 1
E-Series Networked Display Reference Manual
Video 1, 2, 3 or 4
and sets the
VIDEO 1
Video 1 Install
Rename
Type COMPOSITE
Highlight TYPE
Select TYPE
Select S-VIDEO
Cycle Video
option