Pre-Requisites For Using The Weather Application; Adding A Weather Application; Specifying The Weather Elements - Raymarine E120W Reference Manual

192

Pre-requisites for using the weather application

For your E-Series to display weather data, your system must be connected to a
Raymarine SR100 Sirius weather receiver which is supplying the appropriate data. For
your vessel to be displayed and for weather reports to be available at your position,
you will need a fix for your boat's position and be within US coastal waters.
For further information on installing and commissioning a weather receiver, please refer
Note:
to the Weather Receiver Installation Guide.

Adding a weather application

A weather application does not appear in the pre-configured page sets. You will
therefore need to customize a page set to include a weather application window.
Please refer to

Specifying the weather elements

You can view textual reports or animated graphics and specify the weather elements
that you require:
1. Open a weather application window.
2. Display the weather graphics menu:
3. Select the weather elements for display:
page 257
for details.
NOWRad
Storm Cast
Sea Surface Temp
Canadian Radar
DISPLAY
Storm Tracks
GRAPHICS...
Lightning
Surface Ob Stations
Cities
Wind
Waves
Surface Pressure
Repeat until all options set as required
Highlight required option
Enter option
Toggle ON or OFF as required
E-Series Networked Display Reference Manual
Weather Graphics
ON
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OK