Chapter 11:Using The Engine Monitor; Introduction; Displaying And Setting Up The Engine Monitor - Raymarine E120W Reference Manual

Chapter 11: Using the Engine Monitor

Chapter 11:Using the Engine Monitor

11.1 Introduction

The engine monitor application enables you to view information in the form of gauges
and digital data, from up to three compatible engines. To provide a fast update rate,
the engine data is transferred from the engine's serial interface to your E-Series display
via NMEA2000/SeaTalk
Note: For details of compatible engines and related software updates, please re-
fer to the Raymarine website on www.raymarine.com.
ENGINE
If the pre-configured content of these panels and/or the layout of the individual data
boxes is not suitable, you can configure the system to display the data and layout of
your choice - see

11.2 Displaying and setting up the engine monitor

Before using the engine monitor application you should set up your system as follows:
1. Customize a page set to include an engine monitor application window. For details
of how to select a particular window and application, please refer to
2. Set the number of engines and the maximum tachometer range to reflect your par-
ticular vessel:
2
.
50
25 75
0
100
%
Fuel 1
Fuel Rate
11.61
gals/h
ENGINE &
FUEL
page 175
.
50
25
0
Fuel 2
Fuel Rate
13.95
FUEL ENGINE &
RESOURCES RESOURCES
187
75
100
%
gals/h
TWIN ENGINE
page 221
.