Raymarine E120W Reference Manual page 246

230
MENU ITEM
Depth Units
Choose the units that you require depths to be measured in.
Temperature Units
Select required temperate unit.
Pressure Units
Select required pressure unit.
Volume Units
Select required volume unit.
System Integration Setup Menu
MENU ITEM
DSC Message
When set to ON, details of distress DSC messages are dis-
played on screen
SeaTalk Alarms
When set to enabled, all SeaTalk system alarms are received
and displayed on the chartplotter.
Data Master
When set to ON, the display you are working on is defined as
the master.
Bridge NMEA Heading
Used to prevent NMEA heading data being bridged onto the
SeaTalk bus. Switch this function off if you are using MARPA
with an external fast heading sensor.
NMEA Output Setup
Allows you to switch off individual NMEA out sentences
NMEA Port Setting
Select the appropriate setting dependent on the equipment
attached to the NMEA port for each individual display.
When Navtex 4,800 or 9,600 selected, the option to view
the Navtex message list is available.
ST290 System
Select ON if your E-Series is connected to a SeaTalk
E-Series Networked Display Reference Manual
OPTIONS
(Default in bold)
Meters
Feet
Fathoms
Fahrenheit
Celsius
Bar
Psi
Kpa
US Gallons
Imp Gallons
Litres
OPTIONS
(Default in bold)
ON
OFF
Enabled
Disabled
ON
OFF
ON
OFF
APB, BWC, BWR, DBT, DPT,
GGA, GLL, MTW, RMA,
RMB, RMC, RSD, RTE, TTM,
VHW, VLW, VTG, WPL, ZDA
NMEA 4,800
Navtex 4,800
Navtex 9,600
AIS 38,400
OFF
ON
2
system.