AJAX LeaksProtect User Manual page 9

LeaksProtect User manual | Ajax Systems Support
Jeweller Signal Strength Test
Temporary Deactivation
User Guide
Delete Device
Indication
https://support.ajax.systems/en/manuals/leaksprotect/?_gl=1*u....&_ga=2.172733284.679383060.1687678623-1259365304.1687091388
detected
Switches the detector to the signal
strength test mode
Allows the user to disconnect the
device without removing it from the
system.
Two options are available:
Entirely — the device will not
execute system commands or
participate in automation scenarios,
and the system will ignore device
alarms and other noti=cations
Lid only — the system will ignore
only noti=cations about the
triggering of the device tamper
button
Learn more about temporary
deactivation of devices
Opens the detector User Manual
Disconnects the detector from the hub
and deletes its settings
25/6/23, 10:37 πµ
Ʃελίδα 9 από 17