AJAX LeaksProtect User Manual page 5

LeaksProtect User manual | Ajax Systems Support
account, add the hub to the app, and create at least one room.
2. Check the internet connection (via Ethernet cable and/or GSM
network).
3. Check the hub status in the app: make sure that it is disarmed
and does not update.
How to pair the detector with hub:
1. Select Add Device in the Ajax app.
2. Name the device, scan or enter the QR Code (located on the
body and packaging), and select the location room.
3. Select Add — the countdown will begin.
4. Switch on the device.
For the detection and pairing to occur, the device should be located
within the wireless coverage area of the hub (at the same facility).
Request for connection is transmitted for a short time at the
moment of switching on the device.
https://support.ajax.systems/en/manuals/leaksprotect/?_gl=1*u....&_ga=2.172733284.679383060.1687678623-1259365304.1687091388
Only users with administrator rights can add the device to the hub.
LeaksProtect has a rigid "ON" button: press it with force to switch the
detector on.
25/6/23, 10:37 πµ
Ʃελίδα 5 από 17