AJAX LeaksProtect User Manual page 8

LeaksProtect User manual | Ajax Systems Support
Leakage detected
Temporary Deactivation
Firmware
Device ID
Settings
1. Devices
2. LeaksProtect
3. Settings
First =eld
Room
Alert with a siren if leakage is detected
https://support.ajax.systems/en/manuals/leaksprotect/?_gl=1*u....&_ga=2.172733284.679383060.1687678623-1259365304.1687091388
Setting
Alarm if the water sensor contacts wet
Shows the status of the device: active,
completely disabled by the user, or only
noti=cations about triggering of the
device tamper button are disabled
Detector =rmware version
Device identi=er
Value
Detector name, can be edited
Selecting the virtual room to which the
device is assigned
sirens
If active, added to the
system are activated if leakage is
25/6/23, 10:37 πµ
Ʃελίδα 8 από 17