Changing The Ip Address - Banner Sure Cross Performance DX80 Instruction Manual

®
Sure Cross Performance DX80 Wireless I/O Networks
1. Open a Web browser and log into the Ethernet Bridge or GatewayPro by typing the IP address in the browser location
window: http://192.168.0.1.
The Web home page for the Ethernet Bridge or GatewayPro displays.
2. Click on any tab at the top of page to log into the configuration software.
3. Enter system as the user name and admin as the password.
After making your changes and saving the file, close the browser to log out of the configuration system.

5.2.2 Changing the IP Address

Use the page tabs at the top of the page to select the hierarchical path: System > Setup > Network . To change the IP
address, type in the new IP address and click the Change IP button. The IP address change activates when the Ethernet
Bridge or GatewayPro reboots (cycles power).
Important: Verify the new IP address is correct before cycling power to the device. After the IP address is
changed, you must enter in the new IP address to access the Web page-based configuration screens. Write down
the new IP address (and any other changed parameters on this screen) or print this page and file for your record.
38
All manuals and user guides at all-guides.com
www.bannerengineering.com - Tel: 763.544.3164