Table of Contents
Advertisement
User Manual
Ouster LiDAR
Application Recommendations
Save Processing Time
38 |
©
Danfoss | March 2023
For example, the image above shows one method to detect if the Ouster LiDAR compliance block is
receiving at the expected frequency using the ACL Obstacle_Detect and Wall_Detect blocks.
To have a machine function as efficiently as possible, configure the code to save processing time.
One way to save processing time is to turn off sections of the code when they are not needed.
For example, use a switch component with -1 to turn off a block when it is not being used.
AQ404281942428en-000103
Advertisement
Table of Contents
Need help?
Do you have a question about the PLUS+1 Compliant and is the answer not in the manual?
Questions and answers