Table of Contents
Advertisement
User Manual
Ouster LiDAR
Add the Ouster Block
16 |
©
Danfoss | March 2023
c) Select Data_Lockers.
d) Select Add if a confirmation message appears.
e) Place the newest Data_Lockers block in the application. This block can go anywhere in the
application and does not connect to other blocks. It does not need to be on the same page as the
Ouster LiDAR compliance block.
f) If there is an older Data_Lockers block in the application, delete the old block.
5. If connecting one Ouster LiDAR hardware, see
than one Ouster LiDAR hardware, see
Configure One LiDAR
Configure Multiple LiDARs
on page 26.
on page 17. If connecting more
AQ404281942428en-000103
Advertisement
Table of Contents
Need help?
Do you have a question about the PLUS+1 Compliant and is the answer not in the manual?
Questions and answers