Table of Contents
Advertisement
User Manual
Ouster LiDAR
Add the Ouster Block
©
Danfoss | March 2023
b) Select Ouster_LiDAR.
c) Select Add if a confirmation message appears.
d) Place the newest Ouster LiDAR compliance block in the application. If connecting multiple LiDARs,
place an additional Ouster LiDAR compliance block for each piece of Ouster LiDAR hardware.
4. Place a new Data_Lockers block from the Autonomous Control Library version 2.6 in the application.
a) Look under the Function tab.
b) Expand the Utility drop-down.
AQ404281942428en-000103 | 15
Advertisement
Table of Contents
Need help?
Do you have a question about the PLUS+1 Compliant and is the answer not in the manual?
Questions and answers