Status Texts - Deif AGC 150 Operator's Manual

Display text
You can select five of the display texts for each display view.
3.4

Status texts

Status text
ACCESS LOCK
AMF ACTIVE
AMF AUTO
AMF MAN
AMF SEMI
Aux. test ##.#V ####s
BLOCK
COOLING DOWN ###s
DERATED TO #####kW
DG BLOCKED FOR START The generator has stopped and has active alarm(s).
EXT. START ORDER
EXT. STOP TIME ###s
FULL TEST
FULL TEST ###.#min
GB ON BLOCKED
GB TRIP EXTERNALLY
GENSET STOPPING
Hz/V OK IN ###s
IDLE RUN
IDLE RUN ###.#min
ISLAND ACTIVE
ISLAND AUTO
ISLAND MAN
ISLAND SEMI
Operator's manual 4189341311B EN
Condition
The configurable input is activated, and the operator tries to activate one of the blocked keys.
The controller is in auto mode during a mains failure.
The mains controller is in auto mode and ready to respond.
The controller is in manual mode and waiting for operator input.
The controller is in semi-automatic mode and waiting for operator input.
The battery test is activated.
Block mode is activated.
Cooling-down period is activated.
Displays the ramp-down set point.
A planned AMF sequence is activated (without a mains failure).
The extended stop timer is running.
Test mode is activated.
Test mode is activated and test timer counting down.
The generator is running, the GB is open and there is an active Trip GB alarm.
Some external equipment has tripped the breaker. An external trip is logged in the event log.
Cooling down has finished.
The voltage and frequency on the genset is OK. When the timer runs out the generator breaker
can be closed.
The Idle run function is active. The genset will not stop until a timer has expired.
The Idle run function is active. The genset will not stop until the timer has expired.
The controller is in auto mode and supplying power while not connected to a mains supply.
The mains controller is in auto mode and ready to respond.
The controller is in manual mode and waiting for operator input.
The controller is in semi-automatic mode and waiting for operator input.
Page 13 of 22