Logs Menu - Deif AGC 150 Operator's Manual

Caution
If an alarm is blocking a genset in AUTO mode from starting, the genset will automatically start if the condition
that triggered the alarm has gone and the alarm has been acknowledged.
4.2

Logs menu

These are the log sub-menus:
1. Event log: Shows up to 500 events.
2. Alarm log: Shows up to 500 alarms. Only the latest 100 alarms are shown on the display unit, while the remaining alarms
are shown in the utility software.
3. Battery test log: Shows up to 52 tests, either Test OK or Test failed.
Access the log menu from the controller
1. From the view menu, push the
2. Use the and
3. Push the button to select Logs.
4. Select the log you want to see and push the
5. To leave the Log , push the
Access the log list with the utility software
1. Select Logs from the menu on the left.
2. In the task bar, select Read logs
3. Select the Log list you want to see.
Operator's manual 4189341311B EN
button.
buttons to go to Logs.
button.
.
CAUTION
button.
Page 22 of 22