3. Menus
3.1
Menu structure
The controller has two menu systems, which can be used without password entry:
• The View menu system: Shows the operating status and values. The system has 20 configurable windows, that can be
entered with the arrow buttons.
• The Parameters menu system: The operator can see the controller's parameters. A password is necessary to change
the parameter settings.
3.2
Parameters menu
You can configure the controller in the parameters menu and you can also find information, which is not available in the
view menu. From the view menu, push the
the different parameters and select with the
Parameters menu example
This is an example of how to change the nominal voltage settings.
Operator's manual 4189341311B EN
button to find the parameters menu. Use the
button.
and
buttons to find
Page 9 of 22