Ports And Connectors - Matrix SETU VFX Quick Start Manual

Ports and Connectors

Port Connector
12VDC-2A DC Jack
a
RJ11
P1 to P8 (FXO )
b
RJ11
P1 to P8 (FXS )
c
RJ11
LifeLine Port
Reset Button ---
USB Port ---
WAN Port RJ45
LAN Port RJ45
a. FXO Port is available only in VoIP-FXO Gateway.
b. FXS Port is available only in VoIP-FXS Gateway.
c. Life Line Port is available only in VoIP-FXS Gateway.
LEDs
SETU VFX has total 10 LEDs. One for Power (PWR), one for Status (STS) and eight Port LEDs (P1
to P8). The LEDs indicate the status of the ports and various events occurring on the ports,
including errors.
To each LED, except Power and Status, you can assign a port of your choice. So, if required, you
can assign some or all of these LEDs to SIP Trunks. To know more, see Port LED topic under
Maintenance in the System Manual.
SETU VFX is easy to install and operate. The built-in web server, Jeeves, allows you to configure
the system parameters and features on-site as well as from a remote location.
Matrix SETU VFX Quick Start
Description
To connect 12VDC, 2A Power Adapter.
To connect PSTN lines or a PBX.
To connect standard Telephone Instruments, or a Fax Machine or
a PBX.
To access PSTN line during power failure/emergency conditions.
To restart the system or to restore the default LAN IP Address.
Unused
To connect to the IP network over a DSL Modem or Router or a
LAN Switch.
To connect a computer or a LAN Switch.
3