Installing The Lower Triple Clamp - KTM 450 SX-F 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.12
60
Z03286-10
Z03288-10

Installing the lower triple clamp

A01192-10
(Factory Edition)
–
1
Remove screw . Detach the wiring harness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables or lines.
–
Remove steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
Main work
(All standard models)
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on steering head seal
4
.
p. 159)
1
.