–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
Remove screws
–
Take off cover
F03690-10
(All standard models)
–
Remove screws
–
Press back the brake linings by slightly tilting the brake
caliper laterally on the brake disc. Carefully pull the brake
caliper up and off the brake disc.
–
Press the brake piston back into the basic position and
ensure that brake fluid does not flow out of the brake fluid
reservoir; extract some if necessary.
Info
S05364-10
Do not operate the hand brake lever if the brake
caliper has been removed.
(Factory Edition)
–
Remove screws
–
Press back the brake linings by slightly tilting the brake
caliper laterally on the brake disc. Carefully pull the brake
caliper up and off the brake disc.
–
Press the brake piston back into the basic position and
ensure that brake fluid does not flow out of the brake fluid
reservoir; extract some if necessary.
Info
F03695-10
Do not operate the hand brake lever if the brake
caliper has been removed.
–
Remove cotter pins
brake linings.
–
Clean the brake caliper and the brake caliper bracket.
F03696-10
1
.
2
3
with membrane
.
4
.
4
.
5
6
, pull out pin
, and remove the
BRAKE SYSTEM 12
97