11 SERVICE WORK ON THE CHASSIS
62
–
Using a plastic hammer, tap lightly on the upper triple
clamp to avoid stresses.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder on the left.
Mount and tighten screw
S05334-11
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
9
screws
S05330-12
(Factory Edition)
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Push on steering head seal
F03661-10
–
Position the upper triple clamp and handlebar.
–
Mount screw
Guideline
Screw, top steering
head
Z03281-10
6
.
M8
7
.
M8
25 Nm (18.4 lbf ft)
.
p. 159)
1
.
2
, but do not tighten it yet.
M20x1.5
17 Nm
(12.5 lbf ft)
8
.
Loctite
®
243™
12 Nm (8.9 lbf ft)