11 SERVICE WORK ON THE CHASSIS
11.10
58
S05604-11
Installing the fork legs
F03665-11
S05331-11
S05604-12
(Factory Edition)
–
3
Loosen screws
. Remove the left fork leg.
–
4
Loosen screws
. Remove the right fork leg.
Main work
–
Position the fork legs.
1
Air bleeder screw
the front.
A
Valve
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
be flush with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
(All standard models)
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom
triple clamp
(Factory Edition)
–
2
Tighten screws
.
Guideline
Screw, top triple
clamp
–
3
Tighten screws
.
Guideline
Screw, bottom
triple clamp
of the right fork leg is positioned to
M8
17 Nm
(12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)
M8
17 Nm
(12.5 lbf ft)
M8
12 Nm (8.9 lbf ft)