11.11
Removing the lower triple clamp
–
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front
brake caliper
–
Position the brake line and the clamp. Mount and tighten
5
screws
.
S05330-11
Finishing work
–
Install the front wheel.
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove the start number plate. (
–
Remove front fender. (
–
Take off the handlebar cushion.
Main work
(All standard models)
–
Remove screw
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and
place to one side.
Info
S05332-10
Cover the components to protect them against dam-
age.
Do not kink the cables or lines.
–
Remove steering head seal
–
Remove the lower triple clamp with steering stem.
–
Remove the upper steering head bearing.
S05333-10
SERVICE WORK ON THE CHASSIS 11
M8
25 Nm (18.4 lbf ft)
(
p. 108)
(
p. 106)
(
p. 57)
p. 66)
p. 66)
1
. Detach the wiring harness.
2
.
3
.
4
.
4
.
Loctite
®
243™
p. 53)
59