Installing The Engine Guard (Factory Edition); Removing The Fork Legs - KTM 450 SX-F 2023 Owner's Manual

11.8

Installing the engine guard (Factory Edition)

11.9

Removing the fork legs

–
Position the engine guard on the frame.
–
Mount screws
Guideline
Remaining screws,
chassis
–
Mount screws
Guideline
Remaining screws,
chassis
The engine guard is directed evenly toward the front.
–
Tighten all the screws of the engine guard.
Guideline
Remaining screws,
chassis
F03768-11
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and the brake line to hang loosely to
the side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
S05330-10
(All standard models)
–
Loosen screws
–
Loosen screws
S05331-10
SERVICE WORK ON THE CHASSIS 11
1
, but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
2
with bushings, but do not tighten yet.
M6 10 Nm (7.4 lbf ft)
M6 10 Nm (7.4 lbf ft)
( p. 106)
1
and take off the clamp.
2
and take off the brake caliper.
3
. Remove the left fork leg.
4
. Remove the right fork leg.
p. 53)
57