Start Button; Combination Switch; Overview Of Indicator Lights (All Sx-F Models) - KTM 450 SX-F 2023 Owner's Manual

6.5

Start button

6.6

Combination switch

6.7 Overview of indicator lights (all SX‑F models)
1
Start button
Possible states
• The start button
• The start button
motor is actuated.
F03650-10
The combination switch is fitted on the left side of the handlebar.
Possible states
STANDARD – STANDARD mapping is activated when
1
the indicator lamp
STANDARD with TC – STANDARD mapping with trac-
1 TC
tion control is activated when the indicator lamp
and the TC indicator lamp light up.
ADVANCED – ADVANCED mapping is activated when
2
the indicator lamp
ADVANCED with TC – ADVANCED mapping with trac-
2 TC
tion control is activated when the indicator lamp
and the TC indicator lamp light up.
The engine characteristic can be changed using button
2
button on the combination switch.
Traction control can be activated using the TC button
combination switch.
Launch control and the quickshifter can also be activated using
the combination switch.
F03761-10
Possible states
Malfunction indicator lamp lights up/flashes orange
– The OBD has detected a malfunction in the vehi-
cle electronics. The malfunction indicator lamp also
lights up if traction control is activated and the speed
limiter intervenes.
TC indicator lamp lights up orange – TC is enabled or
is currently intervening. The TC indicator lamp flashes
if launch control is activated.
A01223-11 QS indicator lamp lights up blue – The quickshifter
is activated. The QS indicator lamp flashes when the
quickshifter is being programmed.
Indicator lamp
ping is activated.
Indicator lamp
ping is activated.
is fitted on the right side of the handlebar.
is in the basic position
is pressed – In this position, the starter
A
lights up.
B
lights up.
lights up white – STANDARD map-
A
lights up green – ADVANCED map-
B
CONTROLS 6
A
B
1
and
3
on the
15