10.8
Checking the static sag of the shock absorber
Main work
–
Position the sag gage in the rear axle and measure the
distance to marking SAG on the rear fender.
Sag gauge (00029090200)
–
Note the value as dimension
F03630-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Measure dimension
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance again between the rear axle and mark-
ing SAG on the rear fender using the sag gage.
–
Note the value as dimension
Info
The static sag is the difference between
measurements
–
Check the static sag.
Static sag (SX‑F EU)
Static sag (SX‑F US)
Static sag (XC‑F US)
Static sag (Factory Edition)
»
If the static sag is less or more than the specified value:
402416-10
–
Adjust the spring preload of the shock absorber.
(
p. 42)
TUNING THE CHASSIS 10
A
.
p. 53)
A
of rear wheel unloaded. (
B
.
A
and
B
.
35 mm (1.38 in)
35 mm (1.38 in)
35 mm (1.38 in)
35 mm (1.38 in)
p. 40)
41