Safety; List Of Accessories - Valor Brava 347 Installation And Owner's Manual

Radiant / convector gas fire
Table of Contents

Advertisement

Before continuing any further with the installation of this appliance please read the
following guide to manual handling:
The approx. lifting weight (kg) of this appliance is as below:
-
Model: Brava
One person should be sufficient to lift the fire. If for any reason this weight is
-
considered too heavy then obtain assistance.
When lifting always keep your back straight. Bend your legs and not your back.
-
Avoid twisting at the waist. It is better to reposition your feet.
-
Avoid upper body/top heavy bending. Do not lean forward or sideways whilst
-
handling the fire.
Always grip with the palm of the hand. Do not use the tips of fingers for support.
-
Always keep the fire as close to the body as possible. This will minimise the
-
cantilever action.
Use gloves to provide additional grip.
-
Always use assistance if required.
-
This appliance does not contain any component manufactured from asbestos or
asbestos related products.
GDC Group is a licensed member of the Benchmark Scheme which aims to improve
the standards of installation and commissioning of domestic heating and hot water
systems in the UK and to encourage regular servicing to optimise safety, efficiency
and performance. Benchmark is managed and promoted by the Heating and
Hotwater Industry Council. It places responsibilities on both manufacturers and
installers. The purpose is to ensure that customers are provided with the correct
equipment for their needs, that it is installed, commissioned and serviced in
accordance with the manufacturer's instructions by competent persons and that it
meets the requirements of the appropriate Building Regulations.
The Benchmark Checklist (on the inside back pages of this guide) can be used to
demonstrate compliance with Building Regulations and should be provided to the
customer for future reference. Installers are required to carry out installation,
commissioning and servicing work in accordance with the Benchmark Code of
Practice which is available from the Heating and Hotwater Industry Council who
manage and promote the Scheme. Visit www.centralheating.co.uk for more
information. At the time of commissioning, complete all relevant sections of the
Benchmark Checklist located on the inside back pages of this document.
Description
Spigot extension
©
GDC Group Ltd. OCT 2016
INSTALLER GUIDE

1. SAFETY

Installer
Heat Engine: 10.5

2. LIST OF ACCESSORIES

Page 7
Fascia: 7.5
Part number
0595191

Advertisement

Table of Contents
loading

Table of Contents