Advertisement
600B741/02
OWNER'S GUIDE
MODEL BR650 VA
(GC No. 32-032-39)
INSET LIVE FUEL
EFFECT GAS FIRE
THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING CONVERSION KIT NO.591149 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND
THE REPUBLIC OF IRELAND (IE) ONLY.
We trust that this guide gives sufficient details to enable the appliance to be operated and
maintained satisfactorily. However, if further information is required, our Valor
AdviceLine will be pleased to help.
Please telephone 0345 626341 (Local call rates apply in the United Kingdom).
In the Republic of Ireland call 353 183 75114
This guide to be left with the owner
© Valor Heating
Advertisement
Related Manuals for Valor FIA BR650 VA
Summary of Contents for Valor FIA BR650 VA
- Page 1 THE REPUBLIC OF IRELAND (IE) ONLY. We trust that this guide gives sufficient details to enable the appliance to be operated and maintained satisfactorily. However, if further information is required, our Valor AdviceLine will be pleased to help. Please telephone 0345 626341 (Local call rates apply in the United Kingdom).
-
Page 2: Table Of Contents
C A R E Thank you for choosing Valor. All Valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and appreciation of your Valor gas appliance by providing simple and informative instructions to ensure that you benefit from the excellent performance and features it has to offer. -
Page 3: Safety
OWNER’S GUIDE SAFETY IF YOU SMELL GAS DON’T SMOKE EXTINGUISH ALL NAKED FLAMES DON’T TURN ELECTRICAL SWITCHES ON OR OFF TURN OFF THE GAS SUPPLY AT THE METER OPEN DOORS AND WINDOWS TO GET RID OF THE GAS IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR LOCAL TELEPHONE DIRECTORY •... - Page 4 OWNER’S GUIDE • Get advice about the suitability of any wall covering near your fire. Soft wall coverings (e.g. embossed vinyl, etc.) which have a raised pattern are easily affected by heat. They may, therefore, scorch or become discoloured when close to a heating appliance. Please bear this in mind whenever you are considering redecorating.
-
Page 5: Operating Your Fire
OWNER’S GUIDE OPERATING YOUR FIRE PLEASE NOTE When operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally harmless and will disappear after a few hours use. - Page 6 OWNER’S GUIDE Lighting the Main Burner • Once the pilot light is established, the main burner can be lit by depressing and turning the control knob anticlockwise to the “High” position. Selecting the Heat Setting • In order to change from one setting to another depress the control knob slightly and turn the knob to the required position.
-
Page 7: Cleaning
OWNER’S GUIDE CLEANING To maintain the high performance and quality finish of your Valor appliance, please follow these guidelines: • Before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. The fire will retain heat for some time before cleaning can begin. -
Page 8: Refitting Coals
OWNER’S GUIDE REFITTING COALS Fit the ceramic rear wall into the bracket at the back of the firebox .See figure 2. Fit the burner tray trim over the front rim of the burner tray. Push the trim fully down. See figure 3. Place the rear base coal in the firebox. - Page 9 OWNER’S GUIDE Place a type “A” coal between the front and rear base coals with the letter “A” upright and so that the coal is against the left side of the firebox. See figure 6. Figure 6 Place a type “B” coal between the front and rear base coals as shown in figure 7.
-
Page 10: Maintenance
We recommend that all gas appliances and their flues, wherever situated, are checked annually. Servicing • In the United Kingdom servicing can be carried out either by a Valor service engineer or a CORGI registered installer. • If you require your fire to be serviced, please contact Valor Service on 0121 386 6203 and quote the following details;...