FLIR DNR700 Series Instruction Manual page 24

5 Basic Setup (DNR700 Series)
5. Click Add. The Status indicator turns green to show the camera is successfully
connected.
NOTE
If the Status indicator is red, click
changes.
6. Click OK to save changes.
NOTE
You can also add a camera to a specific channel by hovering the mouse over an empty channel in split-
screen view and clicking . Then double-click the camera you would like to add and right click to exit.
#LX400082; r. 1.0/38226/38226; en-US
and update the info for your IP camera. Click OK to save
14