Setting; Network; Selecting Dhcp Or Static Ip Address (Tcp/Ip) - FLIR DNR700 Series Instruction Manual

14 Using the Main Menu

14.3 Setting

The Setting menu allows you to configure general system, schedule, network, recording,
display, and motion settings. It also allows you to restore the system to factory defaults.

14.3.1 Network

The Network menu allows you to configure network parameters for your system.
NOTE
The WiFi menu is not supported.

14.3.2 Selecting DHCP or Static IP Address (TCP/IP)

The TCP/IP menu allows you to configure IP address settings.
To configure IP address settings:
1. From the Main Menu, click and then select Network>TCP/IP.
55
#LX400082; r. 1.0/38226/38226; en-US