Table of Contents
Advertisement
Hardware description
Dimensions
2.4 Dimensions
Installation dimensions
7" - 62H-MHC0-...
16
For the installation of the Touch Panel in control cabinets and desks the following dimen-
sions are necessary:
Front panel width
Installation cutting (W x H)
Front panel (W x H)
Rear panel (W x H x D)
Installation depth
The degrees of protection are only guaranteed when the following is
observed:
–
Material thickness at the mounting cut-out: 2.5 ... 6mm
–
The deviation from the plane for the panel cut-out is
condition must be fulfilled for the mounted HMI device.
–
Permissible surface roughness in the area of the seal:
tion coefficient 120)
2.5 ... 6mm
198 x 142mm
212 x 156mm
196 x 140 x 51mm
51mm
£ 0.5mm. This
£ 120µm (fric-
HB160 | TP-ECO | 62H-MHC0 | en | 17-01
VIPA HMI
Advertisement
Table of Contents
