Table of Contents
Advertisement
VIPA HMI
HB160 | TP-ECO | 62H-MHC0 | en | 17-01
3.
Now press the interface module downwards until the holding plate snaps into the
lugs.
Please make sure that the holding plate always snaps to the lugs,
otherwise the holding plate can not be screwed!
4.
Mount the screws again.
After installation the interface module is automatically recognized and can be configured.
Deployment under Windows CE 6.0 Prof.
Installation of the optional MPI/PROFIBUS DP interface
49
Advertisement
Table of Contents
