VIPA HMI Touch Panel
2.4 Dimensions
Installation dimensions
15" - 62P-NHC0
2.5 Technical Data
HB160 | TP-ECO | 62P-NHC0 | GB | 13-45
For the installation of the Touch Panel in control cabinets and desks
the following dimensions are necessary:
Front panel width
Installation cutting (B x H)
Front panel (B x H)
Rear panel (B x H x T)
Installation depth
The degrees of protection are only guaranteed when the
following is observed:
– Material thickness at the mounting cut-out: 2.5 ... 6mm
– The deviation from the plane for the panel cut-out is
0.5mm
This condition must be fulfilled for the mounted HMI
device.
– Permissible surface roughness in the area of the seal:
£ 120µm (friction coefficient 120)
Order no.
Type
Display
Display size (diagonal)
Hardware description
Technical Data
2.5 ... 6mm
368 x 290mm
400 x 310mm
367 x 289 x 50mm
50mm
62P-NHC0
Touch Panel TP 615LC
15"
£
17