YASKAWA VIPA 62H-MHC0 Manual page 39

VIPA HMI
Meaning
Hide keyboard
System setting (Control
Panel)
HB160 | TP-ECO | 62H-MHC0 | en | 17-01
Home Position 1
End End
BS Backspace
up ã
dn ä
lt á
rt â
pgup Page ã
pgdn Page ä
ins Insert
del Delete
Tab Tabulator
Shift
Caps/Lock
The software keyboard allows you to enter key entries without connecting an external
keyboard. As soon as an entry is required the software keyboard is automatically shown.
Hide Input Panel hides the keyboard again.
As many components of the Control Panel conform with the system control of Windows
most of the description is not necessary. The description of the control panel components
relevant for operating the Touch Panel can be found in the following:
n Set display
Via 'Start è Settings è Control Panel è Display' the dialog windows for the display
properties opens. Here you can change the settings for the monitor options. For
example you can adjust the brightness via the register 'Backlight è Advanced'.
Calibrate touch screen
n
If the touch screen does not always react to a double click or not precisely recognize
the position of an entry, you can call the dialog Stylus via 'Start è Settings
è Control Panel'. In the register Double-Tap you can use the grid pattern to preset a
double click velocity and test this on the symbol below. Click [OK] to accept the value.
The calibration of the touch screen is completed via the register Calibration by fol-
lowing the instructions.
Deployment under Windows CE 6.0 Core
Operating system WindowsÒ Embedded CE 6.0 Core > Structure
Ò
,
39