Dimensions - YASKAWA VIPA HMI PPC021 CE Manual

VIPA HMI PPC021 CE
Slot for CFast

2.4 Dimensions

Installation dimensions
HB160 | PPC | 67S-PNJ0 | GB | 15-30
At the back of the Panel PC there is a card slot for a memory card. At
this slot you can plug storage modules of the type CFast 2.0 - 600
MB/s (6GBit/s) - SATA protocol - not hot-swap compatible.
Pin Assignment
S1 GND
S2 SATA_TX1+
S3 SATA_TX1-
S4 GND
S5 SATA_RX1+
S6 SATA_RX1-
S7 GND
PC1 CFAST_CDI
PC2 GND
PC3 n.c.
PC4 n.c.
PC5 n.c.
Prior to removing the CFast card, make sure the unit's
power is off and disconnected from the power supply.
For the installation of the Panel PC in control cabinets and desks the
following dimensions are necessary:
Hardware description
Dimensions
Pin Assignment
PC6 n.c.
PC7 GND
PC8 CFAST_LED1_C
PC9 CFAST_LED2_C
PC10 n.c.
PC11 n.c.
PC12 n.c.
PC13 VCC3
PC14 VCC3
PC15 GND
PC16 GND
PC17 CFAST_CDO
15