Table of Contents
Advertisement
Hardware description
Dimensions
Security flap for
memory cards
2.4 Dimensions
Installation dimensions
12.1" - 62M-JID0-...
14
On the left side of the Touch Panel are the card slots for memory
cards. The cards are visibly covered by a security flap and are thus
secured from slipping out.
Please take care to pull the security flap back before plugging or
pulling a memory card like shown in the illustration and put it back
again afterwards. When plugging, the security flap additionally snaps
into position above the plugged memory card.
For the installation of the Touch Panel in control cabinets and desks
the following dimensions are necessary:
Front panel width
Installation cutting (W x H)
Front panel (W x H)
Rear panel (W x H x D)
Installation depth
1.5 ... 6mm
311 x 249mm
325 x 263mm
309 x 247 x 45mm
45mm
HB160 | TP | 62M-JID0 | GB | 15-36
VIPA HMI
Advertisement
Table of Contents
