Table of Contents
Advertisement
VIPA HMI
Backup
Exit
Back
4.4 Installation Movicon and Startup-Manager
Overview
Proceeding
HB160 | TP-ECO | 62H-MHC0 | en | 17-01
3.
You can optionally set parameters.
4.
Exit with [Finish].
With "Copy" [...] you can copy Windows
destination path.
With "Autostart" you can select the automatic startup of the VNC server, the Movicon-
TCP upload server resp. the Startup-Manager. With [Back] you get back to the select
menu.
By default, the configuration of the Startup-Manager, the registry settings for the back-
light, the local settings and the LAN settings will be saved by [Backup] in 'Flashdisk
è Backup'. The name of the backup file is "backup.bkv". Which settings will be saved
and the storage location are defined in the file "ToDoList.xml" under 'Flashdisk
è VipaStartup'. These can be adjusted accordingly.
The VIPA Startup-Manager will be closed by [Exit] and the system returns to the Win-
Ò
dows
screen.
With [Back] you get back to the start screen of the VIPA Startup-Manager.
After an image update it is necessary to re-install Movicon and Startup-Manager. The cur-
rent data can be found in the service area of www.vipa.com.
For the Panel 62H-MHC0-... the directory VIPA and the file AutoRunMaker.cfg is neces-
sary of the following zip file:
n
62H-MHC0-..._install_SD_Card_Vxxx.zip
Before the installation can be established you have to stop all the running
programmes. This also applies to programmes which are running in the
background, such as the transport service of Movicon (CEUpload-
Server.exe).
1.
Call www.vipa.com
2.
Click 'Service Support è Downloads è Firmware'.
3.
Via 'HMI è TP è ECO(+) Panels' navigate to your Panel and download the zip file
to your PC.
4.
Unzip the zip file and copy the file to the root directory of your SD card.
Deployment under Windows CE 6.0 Prof.
Installation Movicon and Startup-Manager
Ò
CE files on the panel from a source path to a
53
Advertisement
Table of Contents
