Table of Contents
Advertisement
For your safety
2.2
General safety instructions
2.2.1 Before operation
16
───
This chapter provides you with instructions on safety when handling
the product. This product is not capable of stand-alone operation
and is therefore categorized as an incomplete machine. The product
must be installed in a machine or plant by the machine manufac-
turer. Read the documentation prepared by the machine manufac-
turer.
Protective equipment
Do not remove or bypass any protective devices. Check all protec-
tive devices before operation. Make sure that all emergency
switches are present at all times and can be reached by you and
other people. People could be seriously or fatally injured by unpro-
tected machine parts.
Shut down and secure the machine or plant
Shut down the machine or plant. Secure the machine or plant
against being inadvertently started up.
Correctly ground electrical components or modules
Avoid electric shocks due to improper grounding of electrical compo-
nents or modules. Ground all conductive components as specified in
the chapters: "Electrical installation", [Page 50] and "Mechanical in-
stallation", [Page 47].
Keep the immediate environment clean
Keep your workplace and the surrounding area clean. Ensure safe
working.
Do not use defective or damaged electric cylinders
Adhere to the specifications from the technical data for storage,
transport, and operation. Check electric cylinder for damage. Do not
use damaged electric cylinders.
Check safety pictograms
Check whether the designated pictograms are on the product. Re-
place missing or illegible stickers.
Observe tightening torques
Mount and repeatedly check connections and components, comply-
ing with the prescribed tightening torques.
Use the original packaging only
When shipping, transporting, storing and packing, use the original
packaging or non-conductive materials.
AA3000
Version: 2.0
Advertisement
Table of Contents
