Network Management Quick Reference - Honeywell Farenhyt IFP-2000 Manual

151430-L8
6.7

Network Management Quick Reference

Menu
Learn
Network
Edit
Network
Names
Edit Panel
ID
Computer
Access
Network
Programing
Access
Codes
Options/Defaults
Guest or member Add or remove
panels into the
network
Panel Names Network Panel ID
Site Names Edit Site Member
Change current
panel ID
Computer Access *123456
Number
Computer Code *0
Computer Phone Up to 40 digits
Number
Edit Name
Edit Access Code
Select Profile
(01 - 20)
Panel Functions
Edit Panel Names
Edit Site Names
System Reset
System Silence
System ACK
Fire Drill Key
System Tests
Fire Drill Menu
Indicator Test
Walk Test-No Report
Walk Test-With Report
Dialer Test
Clear History Buffer
Point Functions
Disable/Enable Buffer
Point Status
Set SLC Device
Address
SLC Single Device
Locator
SLC Multi-Device
Locator
I/O Point Control
Event History
Set Time & Date
Network Diagnostics
6-10
Network Management
Comments
See Section 6.2.1
See Section 6.2.2
See Section Figure 6.2.3 on
page 2
See Section 6.2.4
Profile 1 is the profile that
dictates what functions the
Firefighter Key has access to.
Because this is the profile for a
keys, the user name and the
access code can not be edited
for this profile.
Profile 2 is the profile for the
installer and is referred to as the
"Installer Code". This profile's
user name and panel functions
can not be edited.
See Section 6.3.