Board Assembly Diagram - Honeywell Farenhyt IFP-2000 Manual

Model IFP-2000/ECS Installation Manual
3.5

Board Assembly Diagram

Trouble Relay
SLC
In/Out
Network
Repeater
SBUS Out
SBUS In
Figure 3-2 shows the circuit boards, metal housing and annunciator that attach the IFP-2000 assembly to the
cabinet. If you should need to remove the board assembly for repair, remove the four mounting nuts which hold
the assembly in the cabinet. Then lift the entire assembly out of the cabinet. Do not attempt to remove the circuit
boards from the metal bracket.
Programmable
Alarm Relay
Chassis
Mounting
Nuts
Figure 3-2 Model IFP-2000 Assembly
3-7
AC
151430-L8
On-board Annunciator
Ethernet
Port
Phone lines
(non-power
limited)
USB
Programming
Port
Flexput
Circuits
Battery
Connections