Honeywell Farenhyt IFP-2000 Manual page 175

Model IFP-2000/ECS Installation Manual
Operation
Occurs When
Mode
The system
detects a
supervisory
condition.
Supervisory
A Supervisory
condition with a
CO detector
Table 10-2: Operations Mode Behavior
System Behavior
The dialer seizes control of the phone line and
calls the central station.
The on-board annunciator sounds a loud,
pulsing beep to distinguish supervisory
signals. For Fire Supervisory the sequence is
two seconds on, two seconds off. For ECS
Supervisory, the sequence is two seconds on,
three seconds off.
SUPERVISORY LED is on.
The LCD displays a screen similar to this one.
Press down arrow to view the fire supervisory
condition. A screen similar to this one displays.
Press SILENCE to silence the annunciator.
After sitting idle, events will display in a screen similar
to this:.
10-13
151430-L8
In This Mode You Can