Router Mode: Remove A Port Forwarding Rule - NETGEAR WAC124-100NAS User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
For information about the settings, see Router mode: Add a port forwarding rule for
a custom service or application on page 233.
10. Click the Apply button.
Your settings are saved. The changed rule displays in the table on the Port Forwarding
/ Port Triggering page.

Router mode: Remove a port forwarding rule

You can remove a port forwarding rule that you no longer need.
To remove a port forwarding rule:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Make sure that the Port Forwarding radio button is selected.
7. In the table, select the radio button for the service or application name.
8. Click the Delete Service button.
The rule is removed from the table.
A default rule remains available in the Service Name menu. A custom rule is removed.
If you want to reinstate the custom rule, you must redefine it.
Router Mode: Manage Port
Forwarding and Port Triggering
236 User Manual