Router Mode: View Information About The Access Point/Router, Internet Port, And Wifi Settings - NETGEAR WAC124-100NAS User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
(Continued)
Field
IP Subnet Mask
Domain Name Server
Field
Wireless Settings (2.4GHz) or Wireless Settings (5GHz )
To change these settings, see Manage the Basic WiFi and Radio Features on page 59 and Manage the Advanced
WiFi and Radio Features on page 215.
Region
Channel
Mode
Wireless AP
Broadcast Name
Wi-Fi Protected Setup
Router mode: View information about the access
point/router, Internet port, and WiFi settings
If the access point/router is in router mode, you can view information about the access
point/router, the IP addresses, and the WiFi settings for each radio.
Maintain and Monitor the Access
Point/Router
Description
The IP subnet mask that the access point/router uses.
The IP address of the Domain Name System (DNS) server that the access
point/router uses.
Description
The country and region in which the access point/router is being used (see Set up
or change an open or secure WiFi network on page 60).
The channel that the radio uses (see Change the channel for a radio on page 217).
The WiFi throughput mode that the radio uses (see Change the WiFi throughput
mode for a radio band on page 218).
Whether the virtual access point (VAP) of the default WiFi network (Wireless 1) is
enabled or disabled (see Disable or enable a WiFi network on page 65).
Whether the default WiFi network (Wireless 1) broadcasts its SSID (see Hide or
broadcast the SSID for a WiFi network on page 66).
Whether the access point/router keeps its existing WiFi settings when you use
WPS to connect a device to the radio:
• Configured. The access point/router keeps its existing WiFi settings. This is the
default setting.
• Not configured. The access point/router generates a random SSID and
passphrase and changes the security mode to WPA/WPA2-PSK mixed mode.
For more information, see Manage the WPS settings on page 222.
151 User Manual