Manage Ssid Isolation For All Wifi Networks - NETGEAR WAC124-100NAS User Manual

AC2000 802.11ac Wireless Access Point/Router WAC124
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select BASIC > Wireless.
The Wireless Network page displays.
6. Select the WiFi network (Wireless 1, Wireless 2, or Wireless 3).
7. Select a Client Isolation radio button:
• Enable. All WiFi clients are isolated. That is, WiFi clients that are connected to
the same WiFi network are prevented from communicating with each other.
(Communication over the Internet remains possible.)
• Disable. WiFi clients that are connected to the same WiFi network can
communicate with each other.
8. Click the Apply button.
Your settings are saved.

Manage SSID isolation for all WiFi networks

By default, as an added security measure, SSID isolation is enabled for all WiFi networks
(SSIDs) on the access point/router, preventing communication between WiFi clients
that are associated with different WiFi networks on the access point/router. Those WiFi
clients can still communicate with each other over the Internet.
You can disable SSID isolation so that clients that are associated with different WiFi
networks on the access point/router can communicate with each other.
Manage the Basic WiFi and
Radio Features
68 User Manual